1、Nickel and tin are plated to an aluminum surface possessing solderability and superb conductivity.
鎳和錫鍍上鋁制表面，具備可焊性和卓越的傳導性。

2、Are solderability test samples archived for one year?
焊錫性樣品是否至少保留一年？

3、This paper deals with results of solderability testing.
本文論述焊料可焊性試驗的結果。

4、High solderability due to specially plated electrodes.
具高可焊性特殊電極端子。

5、The environment of storage can affect the solderability of surface.
存儲環境對表面的可焊性有影響。

6、The solderability of as-plated Pd coatings produced under different process conditions is good.
鍍態下，不同條件下制得的鈀鍍層具有良好的沾錫能力。

7、Deposit properties such as porosity, solderability and adhesion were tested.
測定了錫鍍層的孔隙率、可焊性和結合力。

8、The non-bright tin deposit has good solderability after sealing.
封閉后的霧面錫鍍層仍有良好的可焊性。

9、Is the solderability test frequency being performed at a minimum of once per lot?
焊錫性測試最小測試頻率是否為每批一次？

10、That is why the solderability was measured before and after ageing also.
這就是為什么可焊性要在老化之前和之后分別進行測量。

11、Therefore, solderability of Sn Pb alloy deposit was tested for qualified MLCI products.
對錫-鉛合金鍍層的耐焊性和可焊性進行了檢驗以獲得合格的MLCI產品。

solderability翻譯